Inject-a-Cool — reduce cooling costs by up to 22%
Cooling transfer fluid that makes any chilled water or HVAC system measurably more efficient. UK-tested, non-corrosive, and installed with zero downtime.
What it does for you
Reduced energy costs
Up to a 22% reduction in cooling costs — measured across UK field sites.
Faster cool-down
Chiller reaches target temperature quicker, so plant works less and lasts longer.
Higher efficiency
Chiller runs more efficiently, improving COP with no plant change.
Fewer run cycles
Equipment short-cycles less and operates within a healthier duty band.
Immediate carbon cut
Every unused kWh saves ~0.18 kg CO₂ — no capital project required.
Works across the estate
Compatible with scroll, screw, centrifugal and absorption chillers.
How it works
Why ordinary water wastes energy
Chilled water systems rely on water as the cooling medium because it's cheap and abundant — but water isn't actually a great conductor of thermal energy. It needs more electricity to move the same amount of heat away from your space.
What Inject-a-Cool changes
Inject-a-Cool transfers thermal energy significantly faster and more effectively, reducing overall system runtime without affecting cooling performance. Less electricity delivers the same cooling — straight to your bottom line.
Independently proven performance
18%
Average electricity reduction across a 14-site UK field trial (max 22%)
0%
Increase in corrosion on steel, copper or aluminium in lab testing
6+
Years projected active lifespan in a sealed system
Laboratory thermal-stability testing confirms Inject-a-Cool is active from −20°C to 120°C and shows no increase in corrosion on common system metals.
Real-world scenarios
Hospital campus
Multiple chillers serving wards and data rooms — energy cut by 16–20% year on year.
1970s office block
Fan-coil chilled water HVAC — measured 18% electricity saving.
Data centre
Chilled water loop COP improved 10%, reducing electricity use by 15%.
Food-processing glycol loop
25 m³ chilled circuit — chiller load down 12%, line throughput up.
University district cooling
3.5 GWh annual demand — 22% electricity reduction (≈ 650 t CO₂ avoided).
Where it works
- ▸Chilled water systems (domestic & commercial)
- ▸Air-source & water-cooled chillers
- ▸Air-handling / fan-coil units
- ▸Process cooling & A/C circuits
- ▸Industrial process loops
- ▸Data centre cooling systems
Pairs perfectly with Inject-a-Therm
Treating both heating and cooling circuits across your estate maximises savings — one supplier, one approach, year-round efficiency.
Learn about Inject-a-Therm →Typical return on investment
| Example site | Annual kWh saved | Cash saving* | Payback |
|---|---|---|---|
| 500 m² office | 18,000 | £4,500 | 14 months |
| 50-bed hotel | 45,000 | £11,250 | 11 months |
| Data centre | 343,250 | £85,813 | 16 months |
| Hospital | 874,880 | £218,720 | 19 months |
| Factory | 2,231,658 | £557,915 | 17 months |
| Shopping centre | 554,767 | £138,692 | 9 months |
* Indicative figures based on £0.25/kWh electricity. Actual savings depend on system, building and usage profile.
What customers say
"Inject-a-Cool cut our electricity bill by almost a fifth without touching the plant room."
Nigel Mackie
Director of Cooling Contractors
"Installing Inject-a-Cool across our clients' estate generated measured savings of 19%."
Martin Watson
Chief Engineer, Facilities Management
"The properties Inject-a-Cool consists of are excellent — non-hazardous yet generating great performance."
David Grant
Chemist
Frequently asked questions
Does it replace my inhibitor?+
No — it works alongside any BuildCert-approved inhibitor or glycol. Independent testing confirms full compatibility with leading inhibitors.
Any downtime to fit?+
None. Dosed via a valve, dosing pot or pump adaptor while the system is running.
Does Inject-a-Cool work in any chilled water system?+
Yes — suitable for any wet system with water-to-air heat exchange. Compatible with fan coil units, AHUs, chilled beams and process loops, and with scroll, screw, centrifugal and absorption chillers.
Clean or dirty system?+
Both. Inject-a-Cool works by increasing the thermal contact surface within the system, so it performs well regardless of system condition.
Should a corrosion inhibitor still be used?+
Yes. While Inject-a-Cool offers some corrosion-inhibiting properties, it's not a replacement for certified inhibitors — and it is fully compatible with leading BuildCert-approved products.
How long does it last?+
At least six years in a sealed system. Top-up only if the system is drained down.
Is it safe to handle?+
Yes. Non-hazardous under CLP — standard PPE is sufficient.
Annual testing and warranty?+
An annual maintenance test ensures the additive continues to perform. A 10% charge covers the test, any required top-up, and a full replacement at no extra cost should the fluid ever need replacing.
What's the typical ROI?+
Most installations pay back within a few months to under two years depending on system size, usage and operational efficiency. We provide a free system survey and payback calculation.
Get your free Inject-a-Cool info pack
Receive a comprehensive overview of Inject-a-Cool technology, including technical specifications, case studies and detailed ROI analysis — everything you need to make an informed decision.
- Complete technical specifications
- Real-world case studies with verified savings
- ROI calculator and payback analysis
- Installation requirements and process
- Warranty and support information
Request your info pack
Ready to start your assessment?
Speak with an accredited lead assessor for a fixed-fee quote. No hidden costs.